Getting started

Yemoja keeps your logbook as a folder of plain files you can read yourself. This chapter is about the window: opening a logbook, finding your way round it, and changing what it holds. What the files look like is in data-format.md, and what each field means is in data-fields.md.

Opening a logbook

With no logbook open, the window shows only Home, Calculations, System and Manuals, and Home offers two buttons.

  • Open an existing Yemoja logbook asks for a folder holding one. On a computer, a folder with no logbook files in it opens as an empty logbook; on a phone it is refused, and Create is the way to start one there.
  • Create a new Yemoja logbook asks for a folder, and one that does not exist yet may be typed. The new logbook comes with what Yemoja ships already in it — the regions of the world, the agencies' certifications and a catalogue of generic gear — and nothing of yours. A folder that already holds a logbook is refused rather than written over.

The folder can also be named when Yemoja is started, and it then opens straight away. Otherwise Yemoja opens the logbook you had open last, and an update does not change that.

Keep a logbook open in one place at a time. Nothing stops two windows, or a computer and a phone sharing the folder through a sync, from having it open together, and where both change it, the one that saves a file last is what is kept.

Tell Yemoja which person you are. A new logbook names nobody, and until it knows, it cannot say which medical and which insurance are yours to be warned about, or which certifications are. Add yourself on the Community tab, then press the This is me button, the round figure on your card. It writes you into yemoja.json as the logbook's user, which data-format.md describes; press it on somebody else to move it.

Home

The top of the screen greets you and counts your dives, the places you dived and the time you spent underwater. Until Yemoja knows which person you are, it says how to tell it instead.

Warnings come next, when something is due. A red box holds what has already lapsed, and a yellow one what falls due within a month:

  • a piece of gear whose maintenance is due, from the valid_until of each entry;
  • your own medical, taken to run a year from your last check;
  • your own insurance, from its end date.

Nobody else's medical or insurance is warned about, and generic gear owes nothing. When nothing is due, nothing is shown.

Download from dive computer is under the greeting too, so a download after a dive is one press; it opens System, where the download shows how far it has got and its dives are reviewed.

Under that is a tile for each of the other tabs; press one to go there. On a phone, back returns here from any of them. Without a logbook open, two buttons above the tiles get you one: Open an existing Yemoja logbook for a folder you already keep one in, and Create a new Yemoja logbook for an empty folder.

The tabs

  • Dives lists your dives in a table, newest first, grouped by year. A dive you have planned and not yet made is listed too, with plan where its number would be. A year folds away with its arrow, and clicking the year chooses all its dives. A trip is one cell down the dives made on it, and clicking it chooses the trip.
  • Gear lists your equipment by category and then by kind. Anything with no category sits at the top.
  • Community holds people, operators and certifications, each on a small tab of its own. You are marked among the people, and on a computer the tab opens on you.
  • Locations holds the regions of the world as a tree, the sites in the one chosen, and a map of it with your sites marked. The tree ends with No region where a site names none, which is where a site you have just made waits until you say where it is. Hide unused, which is on to begin with, leaves out the sites none of your dives were at, and the regions left with nothing in them.
  • Calculations gives a number from figures you type, with no dive to read them from. Choose what to calculate on the left; the form is on the right. On a phone the list comes first, and back returns to it. See Calculations below.
  • Statistics charts your dives; see Statistics below.
  • System downloads from a dive computer, imports, exports and holds the settings; see System below.
  • Manuals is this manual.

Several dives can be chosen at once. Hold Ctrl and click to add a dive or take one out, or hold Shift and click to take every dive between the last one chosen and this one. What they come to together is shown instead of a single dive: the range and average of each figure, how many there were of each value, and how many said yes.

Statistics

Statistics plots your dives. It opens on Dives per month; the box above the chart offers a few others by name, and Your own lets you choose what is drawn. Then the first box chooses how:

  • Each dive is a dot per dive, one figure against another.
  • Count, Total, Average, Largest and Smallest cut the bottom axis into bars and bring the dives in each to one figure.
  • Running total adds the dives up in the order you made them.

The next boxes choose the figures, and by chooses how wide a bar is: a month, a quarter, a year or five years for a date, and a round number for anything else. The bars widen where there would be too many to read.

System

System is three boxes.

Logbook opens a logbook you already have, makes a new one, or reloads the one that is open: Reload logbook reads your files again, for a change made to them outside Yemoja, by a sync or by hand.

Data downloads from a dive computer, imports and exports. While one of them is running or waiting for you, the box says what under its buttons; when dives have arrived, it is where you review them. On a phone, Review opens the list as a page of its own, and back returns to System. Downloading and importing are explained in computers-and-importing.md, exporting in uddf.md.

Settings shows every setting, ready to change; see settings.md.

A greyed button says why under its row: it needs a logbook open, one is already running, or the device cannot do it.

Reading an item

What you choose is shown on a card, titled with its name.

  • A value that points at something else is a link. Following it goes to that item, on whichever tab holds it.
  • A value in grey italics was calculated by Yemoja rather than written by you.
  • A value in bold was calculated by Yemoja and then corrected by you.
  • A value in red could not be read, and says why in its place.
  • A value in ordinary type is one you wrote on a field Yemoja never calculates.
  • A rating shows as stars, two points to a star.
  • A person, a piece of gear, a dive site or an operator lists its dives in a box at the bottom.

Something an item holds several of, such as a dive's recordings or a person's courses, is a box with a small tab for each. The recording a dive is worked from comes first, marked with a star. A dive's recordings are all drawn to the same scale, so a shorter or shallower one looks it.

A planned dive counts nowhere: not in the totals on Home, not in the statistics, and not in the number a year carries. Clicking a year chooses the dives you made in it. If you tick a plan yourself and ask what your selection comes to, the answer includes it — what you chose is what is counted.

A recording is drawn as a graph: the depth down the left, the minutes along the bottom. A stepped line is the stop your computer set, with the water above it shaded red while the stop stood. A plan is drawn with a dashed line, since it has not happened. The right-hand axis is chosen from its title: the temperature, a cylinder's pressure, the no-decompression time as NDL, and oxygen loading as CNS and OTU. Gas switches are marked with the gas moved to, and alarms with red triangles.

Click anywhere on a graph to see everything at that moment: a line marks it, and a box beside it lists the time, the depth, the ceiling or stop where there is one, and every reading the right-hand axis could show, not only the one it shows. The pressure of the gas you are breathing is underlined. Click elsewhere to move it, and click the box or right-click the graph to close it. This works the same on the planner's graph, where the box stays at its moment and its values change as you edit the plan.

What Yemoja's own model makes of it sits under the graph, where it can be calculated: how deep the stops would start, what each cylinder gives up and ends at, the oxygen clocks, how long before you may fly, and how long before it is out of you. Anything it objects to — going above the ceiling, a cylinder that runs dry, a mix too rich or too lean for the depth it is breathed at, a mix past 50 m END — is listed in red with the minute it happened at, and the ceiling itself is drawn over the graph with the water above it shaded. Its own NDL, time to surface (TTS), GF99, END, pO₂, gauges and clocks can be chosen on the right-hand axis, and the decompression model says what TTS and GF99 are. Where your computer recorded the same reading, Yemoja's is marked calculated so you can tell the two apart.

Most recordings say nothing about it, and then nothing is shown: a computer has to have written down which gradient factors it was running before the model can say anything at all.

Plans are made in the Calculations tab and saved from there; see Calculations. Beside a dive's profiles, Add plan opens the planner for a new plan on that dive, and under a plan, Edit plan opens it there to change. Saving goes back to the dive. A plan sits beside the dive's recording, so you can compare what you meant with what you did. decompression.md explains what the model does, what it assumes, and what it cannot know.

Changing things

Adding, editing and deleting are the three buttons on the tab row, left of the agent's button. They act on whatever you have chosen, and are greyed with the reason shown over them when there is nothing for them to do.

The pencil turns the chosen item's card into a form. Save writes what you changed, and is greyed until you change something; Cancel leaves the item as it was. Something that cannot be saved says why, in red, above the fields, and a field that will not read says so beneath it as you type.

  • The form is the card turned over: the same fields, in the same places, each with its name beside its box.
  • A box Yemoja fills in is locked, and shows what it calculated, or a dash where it had nothing to calculate from. Override beside it unlocks it for a value of your own, and Revert locks it again and shows the calculation at once, before you save. The box looks the same either way, so you can tell at a glance which fields are yours to write and which are Yemoja's.
  • 3 more fields at the end, counting what it holds, opens the ones this item has no use for: the settings Yemoja keeps for itself, and the fields that belong to another kind of gear. Nothing is ever taken away, only tucked out of the way.
  • A field with usual answers offers them from its arrow, and anything else may still be typed. A field with a fixed list offers only that list.
  • A field pointing at another item finds it as you type its name, and its list always ends with making one: type a name nothing matches and the last line reads New dive site: "Blue Hole", which makes the site and points the field at it. With nothing typed the line says type a name and waits.
  • Where a plain name is allowed — a buddy, an emergency contact, a dive computer you keep no item for, a dive site you dived once — the list offers both: Keep "Nionplas" as a name only, which writes the word and nothing more, and New dive site: "Nionplas", which makes the site. Nothing is worked out from a plain name, so a dive whose site is one has no water type, no altitude and no place on the map. A trip, an operator and a certification take no plain name, so there the only offer is to make the item. The new item is made straight away, so cancelling the form leaves it behind. Every type but a dive can be made this way, a dive being named for the day it was made on.
  • A list has + add and a cross beside each entry.
  • A time is typed as minutes and seconds, 42:30, or as minutes alone.

On gear, the fields that only mean something for one kind of item are folded away on the rest: a serial number, an access code and a salt density on anything that is not an instrument, a capacity on anything that is not a cylinder. They are there under the more fields button when you need them.

Adding a tab to something an item holds several of, or taking one away with its cross, happens at once rather than waiting for Save.

The + makes another item and opens it as a form. On Locations it offers Add a region and Add a dive site; the pencil and the bin there act on the site you have chosen, and on the region when you have chosen none. On a tab holding one kind it makes that kind straight away; on a tab holding several it offers them in a list, the kind you are looking at first — so the Dives tab offers Add a dive and Add a dive trip, which is how the first trip in a logbook is made. Nothing is made until you save, and the item's id is derived then, from what you typed. Where nothing is chosen, the middle of the screen offers to add one.

On the Gear tab you can also click a category or a kind in the tree, which chooses it. A new piece of gear added while one is chosen starts out filed there, with the category, and the kind where you chose one, already filled in. Change them in the form like anything else.

The bin deletes the item, after asking. Anything the item holds goes with it. Where other items name it, the question says how many will be left naming something that is no longer there, and which they are when there are only a few; ticking Also remove references to it takes them out as well. With several dives chosen, the bin deletes them all.

Everything is written to your files the moment it is saved, and there is no undo yet. Keep a backup of your logbook folder.

Asking an agent

Yemoja can put your logbook to an AI agent you have installed yourself. It supplies none and pays for none: the agent is yours, it signs itself in, and what it costs is between you and whoever runs it.

Everything the agent reads leaves your machine. Whatever it looks at to answer you is sent to whoever runs its model, and that includes your people's addresses, telephone numbers, e-mail addresses and medical notes, because a question about who you dived with is answered from the items that hold them. Yemoja holds nothing back, so the only judgement about what a provider sees is yours: ask an agent about a logbook you are willing to send, or run a model on your own machine, where nothing leaves it.

First tell Yemoja how to start your agent, in Settings in the System tab: the Agent command box, which settings.md explains. Until it is set, the sparkle button is greyed.

Press the sparkle button at the right of the tabs. A panel opens beside it and starts your agent, which takes a few seconds, and stays there as you move between tabs, so a dive the agent names can be opened and read while you carry on talking. Once it is running, type a question and press Enter, or Ask; Shift and Enter starts a new line. While it is thinking, Interrupt stops the answer where it is and leaves the agent running for the next question. Stop ends the conversation and leaves it to read; Start then begins another.

It reaches your logbook through Yemoja, unless you say otherwise. Every request it makes to read a file, write one or run a command is refused, and the panel says so each time one is. What Yemoja can refuse is only what the agent asks it, though: the agent is a program of your own, running with your rights, and an agent that goes looking for files on its own is a matter between you and it. It can work out where your logbook is — it is started beside it — and it is asked not to touch the files unless you tick Allow raw file access.

It can propose changes, and you decide. Tick Allow logbook edits and an agent can stage changes — correct a clock error across a trip, give one dive's gear to the others. Nothing it stages touches your logbook. The panel says how many items are waiting, and Review takes you to them in the System tab, in the box of what is waiting for you. Each item shows every field it would change, what the field holds and what it would hold. If you have edited one of those fields since the agent staged it, the row says what it holds now, in red, and that change is left alone when you apply the rest. It stays waiting afterwards, still in red, until you Discard it or the agent stages it again against what the field holds now. Discard any item you do not want, then press Apply all or Discard all. The box starts empty for every conversation, like the others.

What is waiting is kept in a folder beside your logbook, with .proposed after its name, so it survives the window being closed. It is not part of your logbook.

It can be let at the files themselves, as a last resort. Tick Allow raw file access and the agent is told where your logbook is, may read its files, and may edit them — directly, with nothing staged and nothing to review. It is asked to do that only for what the tools cannot, to make the smallest change, and to say which file it changed and why; Yemoja reads your logbook again when its turn ends, so the window shows what it did. A file it leaves unreadable stops the whole logbook opening, and the panel says so if that happens. Take a backup first, as you would before editing by hand. Running a command is never allowed, whatever is ticked. This box, too, starts empty for every conversation.

It can be let at the internet. Tick Allow internet access and the agent may use its own tools to fetch a page — a dive site's description, a computer's manual, a table it does not carry. Two things to know before you do. Yemoja cannot see what it fetches or what it sends, so an agent that can read your logbook and reach the internet can put the one into the other. And this is not a lock on the agent's network: it is the window's answer when the agent asks, and a program on your computer has whatever network your computer gives it. The box starts empty for every conversation, like the others.

It works beside your logbook, not in it. An agent writes files of its own as it goes — a note of which tools it has been allowed, and whatever else it keeps. Those go in a folder next to your logbook, named after it with .agent on the end, so your logbook stays your dives and nothing else. Deleting that folder costs you nothing but what the agent remembered about itself.

Check what it tells you. An agent reads your logbook and answers in ordinary language, and it can be confidently wrong: about which dives it counted, or about what you meant. It is asked to say what an answer was based on and to name the dives it used, and each one it names can be opened from the panel — that is what makes an answer checkable. Arithmetic is Yemoja's rather than the agent's, so a total is a total; which dives went into it is the part worth reading.

It is not a dive planner. An agent is asked to give no advice about planning a dive or about decompression, for the reasons the app-info chapter gives, and a model that offers some anyway is not speaking for Yemoja.

Nothing of a conversation is kept. Closing the panel stops the agent and the conversation is gone; it is never written beside your logbook. What the agent remembers on its own side is between you and its provider.

Calculations

Eight things can be calculated: a dive plan, SAC, NDL, MOD, EAD, END, a gas mix and tides. The dive plan is shown first. None but the tides needs a logbook open to calculate, though saving or opening a plan does, and what you type stays while you look at another tab.

A line at the top of the tab says what these figures are not, and it is worth reading once: they come from a model, not a dive computer, they may be wrong, and you use them at your own risk. It says the same as app-info.md and decompression.md, where the whole of it is set out.

SAC is six figures under each other: your breathing rate, the average depth, the duration, the cylinder's size, and the pressure it started and ended at. Click the bullet before the one you want calculated and type the other five; the answer appears in its place as you type. The rate is what you would breathe at the surface, in litres a minute, and the arithmetic is the same Yemoja uses for the SAC it calculates on a recording. An end pressure below nought means the five you typed would have emptied the cylinder — the number is left as it is so you can see by how much.

Dive plan calculates a whole dive. On the left is the runtime, one line for each part of the dive: going down, staying, or coming up. Type a depth, and either how long that part takes or how fast you move, and Yemoja calculates the other and shows it in italics. Leave both empty and it uses the descent or ascent rate from the settings beside it. A line at the same depth as the one before it is a stay, and needs a duration. Durations are minutes and seconds, 2:13, or whole minutes, 25. The number before each line is the minute it ends in. Twenty-five minutes at forty metres is therefore two lines: 40 m going down, then 40 m staying for 22:46.

Under the heading, Start is the date and time the dive begins, and After is the dive it follows, for a second dive of the day. After lists the dives and plans in your logbook that ended in the two days before the start, and starts at None: Yemoja never chooses one for you. If you leave it at None while a dive ended in the day before, a note beside it says so. Once you choose one, the plan is calculated from what that dive left in you, and the note says the surface interval and the CNS you start with.

Each line breathes the gas of the line above it, shown in italics, until you choose another. Choosing the gas above makes it follow again. + adds a line below, and × takes one out. A gas turns red on a line that takes it deeper than its limit or past END max, or shallower than a hypoxic mix may be breathed, a depth turns red on a line that takes you above the ceiling, and a duration turns red on a line that stays at the depth above it without one.

Below your lines, in italics, is the way up Yemoja calculates from where you stopped typing: every stop, and every gas switch it makes. It changes as you type, and there is nothing to press. If you type part of the way up yourself, it adds only what is left, and a dive you have typed all the way to the surface gets nothing added.

On the right are the plan's settings, in four groups: General, Gas, Algorithm and Stops. They start from what you chose in Settings, and a change here is for this plan only. A safety stop of 0 minutes means none. The safety stop is held on the way up as a minimum, and a longer decompression stop at the same depth counts towards it. Atmospheric pressure, under Water in General, is the air pressure where you dive, in bar: 1.013 at sea level, less at altitude, where the same dive owes longer stops. A saved plan keeps it.

The way up switches to a richer gas only where it stops anyway, so a dive whose first stop is shallower than your deco gas's limit stays on its bottom gas past that depth. Tick Gas switches between stops to stop there instead: the way up then halts at the deepest stop depth each richer gas may be breathed at, switches, and holds at least a minute for the switch. A deco stop or safety stop there counts towards that minute rather than adding to it. A new plan starts with it unticked. The two gas reserves follow the same tick.

Under the settings is Contingency, the gas reserve: what you must keep back in case something goes wrong. On its left are two settings, the stress factor and the problem-solving time, which also start from your Settings. Beside them is a line for each scenario, Lost and Buddy out of gas: the scenario's name, its switch, and then what each cylinder's reserve needs to be, what the scenario assumes, and its worst moment. The switch on the Lost line is a choice of which gas is lost, your first deco gas unless you choose another; choose None to leave that scenario out. The switch on the Buddy out of gas line is a tick; untick it to leave that one out. Change a setting and the lines change with it. The decompression model explains both scenarios. The way up the Lost line is worked out on is drawn on the graph as a dotted line: from its worst moment, the time held there, and the stops it owes without the gas you lost, so you can see how much longer that dive would be.

Under that are the gases, a line for each cylinder: the mix, its role, its size, what it was filled to, and your breathing rate. Yemoja shows how deep the mix may be breathed, and what the plan takes from the cylinder and leaves in it. The role says what the cylinder is for:

  • Bottom is held to pO₂ max bottom, and the way up may switch to it.
  • Deco is held to pO₂ max deco, and the way up switches to it by itself where it is the best mix the depth allows.
  • Bailout is held to pO₂ max bottom, and the way up never switches to it: it is breathed only where one of your lines names it. If you switch to it yourself, the way up keeps you on it unless a richer mix is allowed or it goes past its own limit.

A cylinder that one of your lines breathes cannot be taken out until you change that line.

Beside each cylinder, Reserve is what it should still hold when you surface, in whichever scenario asks more. Compare it with End, what the plan leaves in it: it is red when the plan ends with less. The decompression model explains why a reserve at the end covers every moment of the dive.

Under all that is a line with the oxygen clocks, the no-fly time and the desaturation time. Then comes anything Yemoja objects to, such as going above the ceiling, rising faster than your ascent rate, missing the safety stop, a cylinder running dry, a cylinder holding less than its reserve, or a mix breathed too deep or too shallow for its oxygen. Last is a graph of the whole dive.

To keep a plan, give it a name, Plan A unless you choose another, and press Save as new dive, or Attach to existing dive and choose the dive from the list. Attaching always adds a new plan: if the dive already has one by that name, the plan takes the next free letter. If you opened the planner from a dive, with Add plan or Edit plan, you can also save it back to that dive. Open plan lists every plan you have saved, by its dive and its name, and opens the one you choose the same way. New plan empties the planner for a plan of its own, on no dive and called Plan A; if the one you have has changes you have not saved, it asks first whether to save them, and so does opening another plan. What is saved is the dive itself: every depth and gas switch, the way up included, and the cylinders. So is everything the planner was set to, and the lines you typed, so a plan you open again is the plan you saved, with the way up worked out again rather than your defaults of today. If the depths of a saved plan have been changed by hand since, it opens from those depths instead, each part of the dive a line of its own. The start and the dive it follows are saved too, and a plan saved as a new dive is filed under its date. A plan following one dive cannot be saved on to a dive that already follows a different one, and says so; it can still be saved as a new dive.

NDL is how long you may stay at a depth, from leaving the surface, before you owe a decompression stop: type the depth, and the gas if it is not air. The high gradient factor starts from Settings, 70 unless you chose another. Only that one is asked for: a stop becomes owed when the high factor is reached, while the low factor says how deep a first stop is taken once you already owe one. It assumes salt water at sea level, and the descent rate from Settings. Read decompression.md before you trust any of it: this is the same model as the plans, with the same limits.

MOD is the deepest a mix may be breathed before its oxygen passes a limit: type the gas and the limit, which starts as your pO₂ max bottom from Settings. It is the same depth the dive plan shows beside a cylinder, and it is rounded down. Beneath it is the minimum depth, the shallowest the mix may be breathed before its oxygen falls below pO₂ min, which starts as your pO₂ min from Settings. Only a hypoxic mix, one with too little oxygen to breathe at the surface, has one: trimix 10/70 needs about 6 m. It is rounded up. A dive plan warns wherever a mix is breathed shallower than this.

EAD is the depth at which air holds as much nitrogen as your mix does at the depth you type, which is how a nitrox dive is read against air tables. END is the depth at which air is as narcotic as your mix. Helium is not narcotic. Whether oxygen is, agencies disagree, so END has a tick for it: counting oxygen gives the deeper and more cautious depth, and it is on until you turn it off. The three share one gas box, and each assumes salt water at sea level. EAD and END are rounded up.

Gas mix answers two questions about filling a cylinder, and you choose which at the top.

Mix after a top-up is for a cylinder that still holds something: type what is in it and at what pressure, the gas you top it up with, and the pressure you fill to. A 12 L cylinder of EAN32 used down to 100 bar and topped up with air to 200 bar holds EAN27, 26.7 % oxygen.

Gases to add for a mix is for blending: type what the cylinder holds now, with a start pressure of 0 for an empty one, the mix you want and its pressure, and the gases you have, separated by commas. They start as O2, He, air, and EAN32 or any other mix can be listed too. The answer is a line for each gas, in the order you listed them, with the pressure to fill to. List them in the order you fill. Where the cylinder holds too much of something, the first line says how far to drain it, and that is as little as will do. Where your gases cannot make the mix at all, trimix with no helium to add, the form says so.

Cylinder size may be left empty. With it, the form adds how many litres of each gas go in.

These are real gases, which is why the pressures differ from a blending table that adds pressures up. Helium at 200 bar is nearly a tenth less gas than its pressure suggests, and oxygen is more. Trimix 18/45 in an empty cylinder takes helium to 101 bar after the oxygen, where adding pressures says 106. The pressures are for a cylinder at 20 °C, so let it cool between gases and before the last reading: a cylinder read warm holds less than it shows. Pressures up to 340 bar are worked out. Always analyse a mix before you breathe it, whatever the form said.

Tides gives the high and low waters of a day near one of your dive sites, and in the Oosterschelde the current. Choose the site, and the day if it is not today, written 2026-10-03. Only sites that have a position, and that a tide model covers, are listed. At present that means the Oosterschelde, and the North Sea within fifty kilometres of a Dutch tide station. A site on the Grevelingen or on another lake is not listed: there is no tide there. It needs an internet connection: the figures are fetched from Rijkswaterstaat when you ask, and this is the one place where Yemoja itself uses a network. Nothing about you or your logbook is sent, only the name of a tide station or a model's place, and a date.

Model is where the figures come from, and Yemoja chooses the most accurate one that covers the day. Near most dive sites in the Oosterschelde, from two weeks back to two days ahead, it is Rijkswaterstaat's Scaldis-Oost model, which works out the water and the current at the site itself. Near some Oosterschelde sites you can also choose the CVD slack table: the moments of least current that the Belgian dive club CVD gives for the site, worked out from the predicted high and low water at Kats, for any day. Otherwise, for a day that is over it is what the gauge measured. For today it is what the gauge has measured so far, followed by the forecast for the rest of the day, and a line above the table says until when it is measured. The forecast includes the weather, which the astronomical tide leaves out. For the next two days it is that forecast alone. For any other day it is the astronomical tide, the prediction from the sun and the moon alone, which Rijkswaterstaat has computed for some years back and a year or so ahead. You can choose another model from the list. Without a connection the models are greyed and the form says it could not reach them.

Under the choices is a line saying which tide station or model place answered and how far it is from the site, then a table with a line for each turn of the tide: high or low water, the time, the height, and how far the water rose or fell since the turn before. With the Scaldis-Oost model and the CVD slack table, the table also has a line for each slack: Flood begins when the current turns to run in, and Ebb begins when it turns to run out. Where CVD says not to dive at a turn, the line reads Flood: no dive or Ebb: no dive, at the time of the turn at Kats, and a note CVD gives about the site is shown above the table. Times are Dutch clock time, summer time included. Heights are in metres against NAP, the Dutch reference level, which is close to mean sea level. Under the table is the water level through the day, with the forecast part drawn dashed. With the Scaldis-Oost model a second plot shows the current in metres a second: flood above the line at nought, ebb below it, and a dot on each slack.

From a tide station, these are the tides at the station, not at your site. The water at a site turns earlier or later than at the station, sometimes by more than half an hour. Slack water, when the current stops, is not the same moment as high or low water either, and a station gives neither the slack nor the current. From the Scaldis-Oost model they are for the site, but they are a model's figures and can be out by half an hour or more, and close to the bottom or in the lee of a pier the water runs otherwise. From the CVD slack table they are the club's experience at the site laid on a prediction for Kats, and the club accepts no liability for them. Wind and air pressure also move the real tide away from a prediction. Use local knowledge and a published slack-water table for a dive that depends on the current.


This chapter is dedicated to the public domain under CC0 1.0. Copy it, quote it, translate it, build on it — no permission needed and no attribution required.